Journal Craft & Product
Silestone vs Granite: Engineered or Natural?
Silestone is engineered, granite is quarried. What Cosentino and the Natural Stone Institute say about absorption, sealing and heat, and what we show.
Robert VolkanovNovember 19, 20263 min read

Silestone is an engineered surface made in a factory to a design. Granite is a natural stone, and every slab is its own. Most of what follows from that is straightforward, and one thing is not: how much a granite countertop needs sealing, where the stone industry itself gives a two-part answer. Here is the comparison from each side’s published documents.
What each one is
Cosentino’s safety data sheet for Silestone lists inorganic mineral fillers at 85 to 95 percent and polymerized polyester resin at 5 to 15 percent. Granite, in the trade, is a looser word than most people expect. The Natural Stone Institute explains that commercial granite groups many igneous rocks, and a few non-igneous ones, under one name, so two stones sold as granite can differ in composition as well as color.
Absorption, heat, sealing and hardness
- Absorption. Cosentino’s Silestone data sheet reports 0.01 to 0.04 percent by ASTM C97. The Natural Stone Institute gives absorption rates of 0.05 to 0.40 percent by weight for stones in the granite group. Both are low, and the range for granite shows that it depends on the stone.
- Sealing. The Natural Stone Institute’s position says that in many cases it makes sense to seal granite countertops, and also that most granite countertops do not need to be sealed. IRG Stone, a stone supplier, advises re-sealing granite and quartzite yearly. Silestone’s US care guide says not to use water repellents or sealants to bring out luster.
- Heat. The Institute says granite is typically heat resistant up to about 250 degrees Celsius (480 Fahrenheit), warns that localized heat can crack stone, and recommends trivets. Silestone’s care guide recommends a trivet or hot pad.
- Hardness. The Institute calls granite one of the hardest of the dimension stone types. Cosentino describes Silestone as highly resistant to scratches and impacts.
- Variation. IRG notes that no piece of natural stone is the same as another. A Silestone color is a designed product, so slabs of one color are meant to match.
- Sun. Silestone’s care guide says not to place it outdoors or under UV lighting. We did not find a comparable statement for granite in the Institute’s consumer pages.
Neither side is neutral on every point. Cosentino sells Silestone and IRG sells stone, and the Institute represents the natural stone trade. Where they differ, the practical step is to ask the supplier of the exact slab for its care sheet.
Questions to ask about a granite slab
- What is the stone’s name, and what is it, geologically? Two slabs sold as granite may not be the same rock.
- What absorption figure does the supplier report, and by which test?
- Does the supplier recommend sealing this stone, with what, and how often?
- Can I choose from the full slab, not a sample, since no two slabs match?
What our floor shows
The displays on our floor do not name a granite, so we cannot show you the two side by side, and this comparison rests on published guidance. What the floor does show is Silestone in many finished kitchens: Persian White and Siberian Frost in Chelsea, Eternal Statuario in Aspen, Charcoal Soapstone in Dubai and Ocean Storm in Monte Carlo, plus full-size slabs on the Cosentino Wall. For natural stone, the IRG display is a wall of stone samples, and Tokyo uses a natural quartzite. A designer can talk through granite using those as reference points, and will tell you when a question is better put to the stone’s supplier than answered from a display.
The Cosentino brand page lists the Silestone line. To see the Silestone slabs with a designer, book a visit and bring the stone names on your list.
Questions
Questions, answered
Is Silestone better than granite?
That depends on the stone and the room. Silestone is engineered so slabs of one color match, while granite is natural and varies slab to slab. The sealing and heat guidance differs, and each supplier publishes its own.
Does granite need to be sealed and does Silestone?
The Natural Stone Institute says it often makes sense to seal granite countertops and that most do not need it. Silestone’s US care guide says not to use water repellents or sealants.
Is granite or Silestone more heat resistant?
The Natural Stone Institute says granite is typically heat resistant to about 250 degrees Celsius but recommends trivets, and Silestone’s care guide also recommends a trivet or hot pad.
Where can I see Silestone in Roseville?
At Design Gallery, in finished kitchens such as Chelsea, Aspen, Dubai and Monte Carlo, and on the Cosentino Wall.
On the floor
Where to see Cosentino
Visit the Gallery
See it working on the Roseville floor.
Or call (916) 500-5417Monday – Saturday, 9:00 AM – 5:00 PM
Keep reading

Craft & Product · November 20, 2026
Porcelain, Quartz and Quartzite in One Walk
Three surface families clients mix up: how porcelain, engineered quartz and natural quartzite differ, and one route through the Roseville floor.

Craft & Product · November 19, 2026
Refrigerator Columns, Built-Ins and Drawers: Choosing a Format
Refrigerator and freezer columns, built-in and counter-depth French doors, refrigerator drawers and clear ice: the formats compared, seen in Roseville.
