Skip to content
Design Gallery, home

Journal Craft & Product

Porcelain, Quartz and Quartzite in One Walk

Three surface families clients mix up: how porcelain, engineered quartz and natural quartzite differ, and one route through the Roseville floor.

Robert VolkanovNovember 20, 20263 min read

Veined white stone backsplash and counters around a green range with copper accents, dark wood cabinetry and a veined white floor in the Siena display at Design Gallery Roseville
Veined white surfaces across the backsplash, counters and floor around a green range, in the Siena display on the Roseville floor.

Porcelain, quartz and quartzite sound like three spellings of one word, and clients use them interchangeably. They are three different kinds of surface: one is fired, one is engineered with resin, and one is quarried. This piece sets out the difference, then describes a single walk through the Roseville floor that puts all three in front of you. The quartz and quartzite question on its own, with its sources, is in quartz vs quartzite kitchen countertops.

What each material is

  • Porcelain. A fired mineral surface, made from clays and minerals at high heat. As a counter or wall it usually comes as a large, thin, dense slab or tile, with the pattern on the face or carried through the body, depending on the product.
  • Quartz. Engineered stone: ground natural quartz held with resin or binders and pressed into a slab. Cambria is quartz, and Silestone is a quartz-based hybrid mineral surface that Cosentino calls HybriQ+.
  • Quartzite. A natural stone, quarried as a block and cut into slabs. Its veining belongs to the stone and is never repeated.

The material between these is Dekton. Cosentino describes it as an ultracompact surface sintered from the kind of raw materials used in glass, porcelain and quartz surfaces, which makes it a close cousin of porcelain and the reason designers often reach porcelain counters by way of Dekton. How Dekton differs from a quarried stone is in Dekton vs quartzite: sintered or quarried.

Porcelain: what a designer looks for

A porcelain surface raises design questions first. Does the pattern run through the thickness or sit on the face only? How does the edge read from the side? How thin a line does the room want? The answers change with the product, so take them from the maker’s data sheet and a conversation with a designer.

Quartzite is not quartz

The names are the confusion. Quartz is manufactured; quartzite is geology. Natural quartzite is cut from a quarry, so every slab differs and the lot you see is the lot you get. In Tokyo, Cristalo Himalaya quartzite from IRG Stone sits over Shinnoki and Alvic cabinetry; the floor record describes a white-to-cream stone with a translucent crystalline structure and soft gray-gold veining. Ask the stone supplier how to care for the specific stone, because a natural stone asks for more attention than an engineered surface.

One walk through the floor

Start at the Quartz Collection, where Cambria and Silestone samples share a display. Walk to the Dekton Wall for the sintered surface at full scale. Porcelain appears in Manhattan, where large-format Cortina Satin White porcelain makes a marble-look backdrop with few grout lines, and as Bedrosians Celine porcelain in the Pet Washroom. Finish in Tokyo for natural quartzite. The route is short, and the differences are visible side by side.

Material names stop being confusing once you can touch all of them in one visit.

How a designer sorts the three

Five questions sort most kitchens, and none of them is about the brand. How much repeat can the pattern have before it feels printed? How hot will the surface get, and from what? Will the room get direct sun? How does the owner feel about a surface that changes with use? And what does the edge need to look like?

  • Pattern that never repeats points toward natural quartzite, because no two slabs are alike.
  • A consistent, designed color points toward quartz, where the maker controls the result.
  • A sun-facing wall, a cooktop surround or an outdoor kitchen points the conversation toward porcelain or Dekton, and to the maker’s figures for that color.
  • A surface meant to look the same for years points away from natural stone and toward the fired materials.

These are starting points, not rules. Each is a prompt for a question to put to the maker, with the data sheet in hand.

Safe is a matter of the household

Clients often arrive having read that one of the three is the safe choice. The safe choice is the one that fits how the kitchen is used and how its owner feels about wear: a surface that develops a patina pleases one household and worries another. The two quartz makers are compared in Cambria and Silestone on one floor, and Dekton against quartz in Dekton or quartz. The Cosentino brand page lists its surfaces.

To take the walk with a client, book a visit.

Questions

Questions, answered

What is the difference between porcelain, quartz and quartzite?

Porcelain is a fired mineral surface, quartz is engineered stone made of ground quartz held with resin or binders, and quartzite is a natural stone cut from a quarry.

Is quartzite the same as quartz?

No. Quartz is a manufactured slab bound with resin or binders. Quartzite is natural stone, so each slab is unique and the lot you see is the lot you get.

Are porcelain countertops the same as Dekton?

They are related but not identical. Cosentino describes Dekton as sintered from the kind of raw materials used in glass, porcelain and quartz surfaces, with no resin binder.

Where can I see porcelain, quartz and quartzite in Roseville?

On the Design Gallery floor, where the Quartz Collection holds Cambria and Silestone, Manhattan shows large-format porcelain, and Tokyo has Cristalo Himalaya quartzite from IRG Stone.

On the floor

Where to see Cosentino

Cosentino and Dekton surfaces

Visit the Gallery

See it working on the Roseville floor.

Or call (916) 500-5417Monday –⁠ Saturday, 9:00 AM –⁠ 5:00 PM

Keep reading

  • A long corridor of lit full-height slabs in white and dark finishes along the slab wall at Design Gallery Roseville

    Craft & Product · November 20, 2026

    Silestone and Dekton Side by Side

    Two surfaces from one maker, made two different ways. How Silestone and Dekton compare when you stand them next to each other in Roseville.

  • An induction cooktop with a raised, lit downdraft vent set flush into a pale stone island in the Black Forest display at Design Gallery Roseville

    Craft & Product · November 20, 2026

    Cambria and Silestone on One Floor

    Two makers, one floor to compare them on. What separates Cambria from Silestone once the slabs and finished kitchens are in front of you.