Skip to content
Design Gallery, home

Journal Craft & Product

Dekton or Quartz: What You Learn Standing at the Slab

A sample chip cannot settle Dekton or quartz. What to look at, touch and ask when both stand in front of you as full slabs.

Robert VolkanovNovember 20, 20264 min read

A row of lit full-height slabs, from green-veined to white marble-look, under the open black ceiling at Design Gallery Roseville
A row of lit full-height slabs, green-veined to white, under the open black ceiling on the Roseville floor.

Dekton or quartz is one of the surface questions a kitchen designer hears most, and a four-inch sample is the wrong tool for answering it. The two materials are made differently, they respond differently to heat and sun, and they read differently once a slab stands at full size and the pattern has room to travel. This piece sets out what separates them and what a designer can check in a room where both are on display. The published figures behind each material are in Dekton and quartz data sheets, and the maker-by-maker comparison of heat, sun, edges and seams is in Dekton vs quartz: sintered stone or engineered quartz.

How the two materials are made

Quartz, in the sense a countertop buyer means it, is engineered stone: ground natural quartz held together with resin or binders and pressed into a slab. Cambria, a family-owned maker in Minnesota, is the plainest example. Silestone, made by Cosentino, is quartz-based too, though Cosentino now calls the line HybriQ+, a hybrid mineral surface made with the technology it introduced in 2020 to reduce crystalline silica. Either way, the maker designs the pattern into the slab, and both makers ask for a trivet or hot pad under a hot pan.

Dekton comes from the same Spanish company as Silestone, but it is not quartz. Cosentino makes it by pressing the kind of mineral raw materials used in glass, porcelain and quartz surfaces, then firing them until they sinter into one dense slab, and it describes the result as having almost no porosity and no resin binder. Resin or no resin explains most of what follows.

What changes at full slab scale

Pattern repeats, veining that runs off the edge, the way a polished face and a matte face of the same color sit side by side: none of it survives a chip the size of a coaster. On the Roseville floor, the Dekton Wall shows Dekton in expansive full-scale slabs, and the Cambria display shows full-size Cambria slabs. The walk from one to the other answers questions a catalog cannot.

  • Pattern travel. Look at how far the movement runs before it repeats, and whether it reads as stone or as print.
  • Face. The floor records list Dekton in polished, matte and velvet faces; ask to see one color in two of them.
  • Light. Look at the slab from where it will be seen, and again from the side, because a white can read cool or warm across the day.
  • Seams. Ask where a slab of that size would meet its neighbor, and whether the pattern carries across the join.

Heat, sun and daily wear

These three usually decide the question, and each has a plain answer from the maker rather than from opinion. Cosentino presents Dekton as resistant to heat, scratching and sunlight, which is why the same material is offered for outdoor kitchens and cladding. Quartz is resin-bound, so hot cookware belongs on a trivet, and Cambria and Silestone both say so in their care guidance. Silestone’s US care guide also advises against outdoor placement and UV lighting.

Ask the maker for the data sheet for the exact color and thickness rather than relying on a general statement. Colors in one line differ, and a data sheet is the document a designer can put in a specification.

The slab is the sample allowed to be the size it will be.

Where Dekton is on the Roseville floor

Dekton appears in more than one setting, which matters because a surface looks different on a wall than on an island. Dekton Rem and Kelya are in Napa, Dekton Nara is at the Table Station, Awake and Somnia are at Reception, and Awake appears again in Verona. The Dekton Samples collection is a library of colors that can be carried to the cabinetry and held against it.

For quartz, the Signature Countertops display shows five half-size Cambria and Silestone slabs, and the Quartz Collection holds samples from both makers, arranged for direct comparison.

A client who has seen only one

A client who has seen only a quartz sample will usually ask for quartz, and a client who has seen only a Dekton photograph will ask for Dekton. The useful thing a designer can do is put both in front of them at the same scale, in the same light, and let the differences show. The decision is then the client’s own. The two Cosentino surfaces are compared in Silestone and Dekton side by side, and the wider family in porcelain, quartz and quartzite in one walk.

If the question is where to see Dekton near Sacramento, the Cosentino and Dekton page answers it, and the Cosentino brand page lists the lines. To walk both materials with a client, book a visit and bring the plan.

Questions

Questions, answered

How do I choose between Dekton and quartz?

Start with where the surface will live: heat, direct sun and the pattern you want. Then compare the two as full slabs, because a resin-bound quartz and a resin-free Dekton read differently at scale.

What should I ask the maker before deciding?

Ask for the data sheet for the exact color and thickness: heat guidance, outdoor suitability and care. Colors in the same line can differ.

Can quartz be used outdoors like Dekton?

Cosentino presents Dekton as resistant to sunlight and offers it for outdoor kitchens. Silestone’s US care guide advises against outdoor placement, so confirm outdoor use for the exact color with the maker before specifying a quartz surface outside.

Where can I see Dekton and quartz slabs in Roseville?

At Design Gallery, where the Dekton Wall and the Cambria display show full-scale slabs, and the Signature Countertops display and the Quartz Collection hold Cambria and Silestone.

On the floor

Where to see Cosentino

Cosentino and Dekton surfaces

Visit the Gallery

See it working on the Roseville floor.

Or call (916) 500-5417Monday –⁠ Saturday, 9:00 AM –⁠ 5:00 PM

Keep reading