Skip to content
Design Gallery, home

Journal Craft & Product

Dekton and Quartz Data Sheets: Absorption, Heat, Sun and Care

What the published data sheets and care guides say about Dekton and quartz: composition, water absorption, heat, sun and sealing, with the document named.

Robert VolkanovNovember 20, 20263 min read

A long corridor of lit full-height slabs in white and dark finishes along the slab wall at Design Gallery Roseville
Full-height slabs in light and dark finishes lit along the slab corridor on the Roseville floor.

Data sheets answer a narrower question than a slab does, but they answer it with numbers and a date. This piece reads the published Dekton and quartz documents side by side: how each is made, what the water absorption figures mean, and what each maker says about heat, sun and sealing. By quartz we mean the two engineered quartz makers on our floor, Cambria and Silestone. For how the two read when you stand at a full slab, see Dekton or quartz: what you learn standing at the slab.

How each is made

Cosentino’s safety data sheet describes Dekton as made by high-temperature sintering, between 1,100 and 1,300 degrees Celsius, of heavily compacted minerals. The raw materials it lists are mainly clays, kaolins and feldspars, with zircon depending on the product and inorganic pigments; quartz can be present as an accessory mineral in those raw materials. A slab can also carry a fiberglass mesh on its back, bonded with polyurethane or epoxy resin, but the body of the slab is the sintered mineral.

Quartz is made differently. Cambria says its slabs are pure natural quartz with pigments and binders. Cosentino’s safety data sheet for Silestone lists inorganic mineral fillers at 85 to 95 percent and polymerized polyester resin at 5 to 15 percent, and since 2020 Cosentino has described the line as a HybriQ hybrid surface with a stated maximum for crystalline silica. The short version: Dekton is fired, quartz is bound.

Side by side, from the documents

  • Water absorption. Cosentino’s Dekton data sheet reports 0.1 percent by one European method and 0.03 to 0.05 percent by ASTM C97. Its Silestone sheet reports 0.05 or less and 0.01 to 0.04 percent by the same two routes. Cambria calls its quartz nonabsorbent and nonporous. Every figure is very low, and the test methods differ, so these numbers do not rank the materials against each other.
  • Heat. Cosentino’s Dekton care guide says pans can be set directly on the surface, with one exception: 8 millimeter Dekton needs protection from hot objects. Cambria says its quartz is not heat-proof and recommends a closed-weave hot pad or solid trivet, and Silestone’s US care guide recommends a trivet or hot pad.
  • Sun. Cosentino’s product guide calls Dekton highly resistant to UV rays in outdoor use, and its safety data sheet lists exteriors, including facades and flooring. Silestone’s US care guide says not to place it outdoors or under UV lighting.
  • Sealing. Cambria says its quartz never needs sealing. Silestone’s care guide says not to use water repellents or sealants to bring out luster. Cosentino’s Dekton care guide describes a low-porosity surface that resists common household stains and describes no sealing step.
  • Sizes and thickness. Dekton is listed at 8 to 30 millimeters on its data sheet and also at 4 millimeters in Cosentino’s product guide, and slab sizes vary by color. Silestone is listed at 12, 20 and 30 millimeters, and Cambria at 1, 2 and 3 centimeters, in standard and jumbo slabs.

Colors in one line can differ from each other, and some documents are older than others, so treat the figures above as a starting point and ask the maker for the data sheet for the exact color and thickness.

What a spec sheet cannot tell you

A data sheet will not show how far a pattern travels, how a velvet face differs from a polished one, or whether a white reads cool or warm in your light. Those are questions for a full slab. They are also where the two look most different. Cosentino’s product guide lists Dekton in finishes from X-Gloss to matte and velvet, and a quartz maker designs the pattern into the slab, so each reads differently once the slab is upright.

Both materials on our floor

The Dekton Wall stands full-scale Dekton slabs, and the Dekton Samples collection carries many colors and variants. Dekton Nara sits beside IRG natural stone in the Table Station, and Dekton Rem and Kelya are in Napa. For quartz, the Cambria display shows full-size slabs, the Signature Countertops display shows five half-size Cambria and Silestone slabs, and the Quartz Collection holds samples of both. The Cosentino Wall puts a full-size Silestone slab in the same display as Dekton.

The Cosentino brand page lists both of its lines, and the Cosentino and Dekton page covers seeing them near Sacramento. To read the data sheets against the slabs with a designer, book a visit and bring the sheets you have collected.

Questions

Questions, answered

Is Dekton a type of quartz?

No. Cosentino describes Dekton as a sintered surface made from compacted minerals under high temperature. Cambria and Silestone are quartz-based surfaces bound with resins or binders.

Is Dekton more heat resistant than quartz?

Cosentino’s Dekton care guide says pans can be placed directly on the surface, except 8 millimeter Dekton, which needs protection. Cambria and Silestone both recommend a trivet or hot pad. Confirm the figures for the exact color and thickness with the maker.

Does Dekton need to be sealed?

Cosentino’s Dekton care guide describes a low-porosity surface that resists common household stains and does not describe a sealing step. Cambria also says its quartz never needs sealing.

Where can I see Dekton and quartz slabs side by side in Roseville?

At Design Gallery, the Dekton Wall, the Cambria display, the Signature Countertops display and the Cosentino Wall stand Dekton, Cambria and Silestone slabs on one floor.

On the floor

Where to see Cosentino

Cosentino and Dekton surfaces

Visit the Gallery

See it working on the Roseville floor.

Or call (916) 500-5417Monday –⁠ Saturday, 9:00 AM –⁠ 5:00 PM

Keep reading