Skip to content
Design Gallery, home

Journal Craft & Product

Quartz vs Quartzite: Which One Belongs in Your Kitchen

Quartz is engineered, quartzite is quarried stone. How the two differ in pattern, sealing, care and heat, and where to see both in Roseville.

Robert VolkanovNovember 20, 20265 min read

A thick dark stone ledge layered over a pale veined stone counter, with a wood bar stool beneath, at Design Gallery Roseville
A thick dark surface with fine copper veins layered over a pale veined counter, a wood stool beneath, on the Roseville floor.

Quartz countertops are engineered: ground quartz bound with binders and pigments into a slab made to a design. Quartzite is a natural stone, a metamorphic rock that began as sandstone and is cut from a quarry. In a kitchen, that difference shows up in four places: how much the pattern varies from slab to slab, how the surface is cleaned, whether it is sealed, and what each side says about heat.

How each one is made

Quartzite starts as quartz-rich sandstone. Geology.com explains that the heat, pressure and chemical activity of metamorphism recrystallize the sand grains and the silica that cements them into interlocking quartz, leaving a rock composed almost entirely of that one mineral. The Natural Stone Institute says quartzite can be of exceptional strength, density and hardness.

Engineered quartz borrows the mineral and changes the process. Cambria says its countertops are made of natural quartz crystals combined with binders and pigments. IRG Stone, a slab supplier that carries both, describes quartz countertops the same way, as ground quartz combined with binders and pigments into a manufactured surface. The process happens in a factory, not in the ground.

The shared word causes most of the confusion. When Use Natural Stone, the Natural Stone Institute’s consumer site, talks about the quartz in quartzite, it means the mineral, not the countertop material that borrows its name. Silestone, from Cosentino, belongs to the engineered family; our piece on whether Silestone is real quartz reads its documents in detail. Dekton, also from Cosentino, is neither: Cosentino calls it an ultracompact surface made by sintering, and our comparison of Dekton and quartzite takes that pairing on its own, and Dekton against engineered quartz has its own piece.

Look and pattern

A quartz color is a product. Cambria describes consistent colors and patterns from slab to slab, so the slab cut for the island is meant to match the one cut for the perimeter. Quartzite is geology. IRG notes that two slabs sold under the same stone name may still look different, and Cambria, from the other side of the comparison, says that natural variation can make pieces hard to match within one room.

That is the appeal of quartzite and also the reason to choose it from the full slab rather than a sample. Engineered quartz also offers the look: Vadara, for one, sells a color it calls quartzite-inspired quartz. The name tells you the look; the material is still engineered.

The label on a natural slab deserves a second look too. Use Natural Stone says marble or dolomitic marble is sometimes sold as quartzite, and that there is no such thing as soft quartzite: a soft stone sold under that name is most likely marble. It describes two simple checks. Real quartzite scratches glass, and it shows no etching after lemon juice or vinegar sits on it for about fifteen minutes.

Daily care and sealing, in plain language

For engineered quartz, Cambria keeps it short. It says its quartz is nonporous and nonabsorbent, never needs sealing, and should not be given sealers or topical treatments at all. Daily care is warm water, a soft cloth and mild soap.

Quartzite is where the sources differ, so here is each position as published:

  • Cambria, which makes quartz, says quartzite requires regular sealing and quick cleanup of spills.
  • IRG Stone, which supplies quartzite, says some quartzites may benefit from sealing while others may not need it, and that a sealer improves resistance to spills without making stone stain-proof.
  • Use Natural Stone says the need depends on how porous the stone is and suggests watching the area around the sink to tell whether a sealer is needed. How long a sealer lasts varies by stone and product, so ask your fabricator how often yours will need it.

Those are general positions, and every slab is its own. Ask your fabricator whether the slab you chose should be sealed, with what, and how often. For cleaning, Use Natural Stone recommends a gentle cleanser, water and a soft cloth, and wiping up spills promptly.

Heat, stains and edges

  • Heat. Cambria says quartzite is more heat resistant than quartz, and that its own quartz is not heat-proof. IRG says the binders in engineered quartz can be damaged by high heat, and that quartzite is generally more tolerant of heat. Cambria and IRG both still recommend a trivet or hot pad under hot pans, and Use Natural Stone advises trivets and cooling racks, whichever surface you choose.
  • Stains and acids. Cambria describes its quartz as nonporous and nonabsorbent. Use Natural Stone says true quartzite will not etch from kitchen acids such as lemon juice or vinegar, and the Natural Stone Institute says a sealer makes stone more resistant to everyday spills.
  • Edges and knives. Cambria warns that sudden temperature changes near edges can damage stone surfaces, and says that no stone surface is scratch-proof, so use a cutting board on either. Geology.com puts quartzite at about seven on the Mohs scale, the same as the mineral quartz.

The sources are not neutral. Cambria makes quartz, IRG Stone supplies both quartzite and quartz slabs, and Use Natural Stone is the natural stone trade’s own campaign. Where they overlap, they agree more than they disagree: both materials are hard, both want a trivet, and both are easier to judge in a room than on a phone screen.

If you want the published figures behind the engineered side, our reading of Dekton and quartz data sheets names each document and the test it reports.

Where to see quartz and quartzite in Roseville

On our floor, the natural quartzite is in Tokyo: Cristalo Himalaya from IRG Stone, a white-to-cream stone with translucent crystals and soft gray-gold veining, set over dark matte and warm wood cabinetry. Siena uses Vadara Ostara Dawn, the quartzite-inspired quartz, which makes the pair a direct test of the look against the stone.

Engineered quartz runs through many finished kitchens. Cambria is in Black Forest, Cortina, Bologna and Walnut Creek. Silestone, in its HybriQ+ colors, is in Chelsea and London. MSI’s marble-look Calacatta Castana is in Geneva.

The slab and stone gallery near Sacramento gathers the countertop displays on one page, and the Cosentino and Dekton surfaces page covers the full-scale slabs. Our Cosentino brand page lists the Silestone and Dekton lines. To compare the stone and the engineered surfaces with a designer, book a visit and bring a photo of the room the counters are for.

Questions

Questions, answered

Is quartzite harder than quartz?

Geology.com puts quartzite at about seven on the Mohs scale, the same as the mineral quartz. Engineered quartz adds binders to the mineral, and Cambria notes that no stone surface is scratch-proof, so use a cutting board on either.

Does quartzite need sealing?

The sources differ. Cambria says quartzite requires regular sealing; IRG Stone says some quartzites benefit and others may not need it; Use Natural Stone says it depends on porosity. Ask your fabricator about the slab you chose.

Which is better for a kitchen island?

Neither in general. Quartzite gives an island a one-of-a-kind slab, chosen from the full piece. Engineered quartz offers patterns that repeat from slab to slab and, per Cambria, needs no sealing. Cambria and IRG both recommend a trivet.

Can I see quartz and quartzite in Roseville?

Yes. At Design Gallery, Cristalo Himalaya quartzite is in the Tokyo kitchen, Vadara’s quartzite-inspired quartz is in Siena, and Cambria and MSI quartz and Silestone HybriQ+ surfaces are in kitchens such as Black Forest, Chelsea and Geneva.

On the floor

Where to see Cosentino

Cosentino and Dekton surfaces

Visit the Gallery

See it working on the Roseville floor.

Or call (916) 500-5417Monday –⁠ Saturday, 9:00 AM –⁠ 5:00 PM

Keep reading