Skip to content
Design Gallery, home

Journal Craft & Product

Workstation Sinks: What to Look For Before You Choose One

A workstation sink adds a ledge or tiers above the bowl. How size, bowl layout, material and accessories differ across the sinks on the Roseville floor.

Robert VolkanovNovember 19, 20263 min read

A stainless workstation sink with a drying rack and a wood cutting board under a black coil faucet, set in a white counter over walnut drawers at Design Gallery Roseville
A workstation sink with a drying rack and a cutting board across the bowl, in the Oxford display on the Roseville floor.

A workstation sink is a sink you can work above. Instead of a bare bowl, it has a ledge or a set of tiers along its edges, and cutting boards, colanders and racks slide along them, so preparing, rinsing and clearing up all happen in one place. Pictures make them look alike. Standing at a few of them shows how much they differ, and that is what this piece sets out to explain.

Ledge or tiers

There are two ways to build the idea. Karran’s workstation models have an integrated ledge, a step along the rim of the bowl that carries the accessories. The Galley builds a multi-tiered basin, with upper and lower tiers that hold its tools at different heights. The Galley’s own page describes a one-piece basin of marine-grade 316L stainless steel, 16 gauge. A ledge is simpler and sits close to the bowl. Tiers give you more levels to work at, and they ask for more room.

Size and the cabinet underneath

Workstation sinks come in more sizes than most clients expect. The Galley’s page lists lengths from two to seven feet, plus corner configurations. The five-foot Galley on the Roseville floor measures 57 1/2 by 19 1/2 inches and its specification calls for a cabinet of at least 60 inches. The Karran models on the floor ask for less: 33 inches for the stainless single bowl and 36 inches for the others. Read the minimum cabinet size on the specification sheet before falling for a sink, because it can decide the layout of the whole run.

Bowl layout and depth

  • Single bowl. One large basin for stockpots and sheet pans, with the ledge running its length.
  • Equal double bowl. A 50/50 split, so one side can hold dishes while the other is in use.
  • Offset double bowl. A large and a small basin, sold by Karran as a 60/40 style, for a big bowl and a small prep bowl.
  • Depth. The Karran bowls on our floor run from 8 3/8 to 10 inches deep, which is a real difference at the elbow.

Material and noise

Stainless steel is the most common choice and appears in two grades on the floor: T304 in the Karran models and 316L marine-grade in the Galley, both at 16 gauge. Karran also shows matte quartz composite sinks, which its sheets describe as 80 percent natural quartz with resins. Noise is a fair question for a steel sink. The Galley wraps its basins in what it calls SilentArmor and states that it reduces noise and vibration by up to 95 percent. That is the maker’s figure, and the way to test it is to run a tap into the sink and listen.

Accessories and mounting

Most of the working life of a workstation sink is in its accessories. The five-foot Galley on the floor comes with an eight-piece kit in graphite wood composite: cutting boards, platforms, colanders, mixing bowls and a drying rack. Karran kits pair a board, a roll-up drying rack, a colander and strainer baskets, and the stainless single bowl has accessories rated to 40 pounds on its ledge. Mounting style matters too: the floor shows undermount sinks and apron-front sinks, and the Galley is described as suited to indoor or outdoor use. A drain on the side or rear changes where the tools can sit, so check where it is.

Where to compare them

The Galley display sets several sinks into one island, from long workstations to smaller basins. Karran Island puts kitchen and bath basins into MSI countertops, so you can see stainless, quartz composite, embossed metal and double-bowl sinks together. The five-foot Galley is part of the kitchen in Napa. Take a cutting board from one to the other and see which reach feels right.

To walk them with a designer, book a visit and bring the sink-base dimensions from your plan.

Questions

Questions, answered

What is a workstation sink?

A sink with a ledge or tiers around the bowl that carry cutting boards, colanders and racks, so preparation and cleanup can happen at the sink.

How big a cabinet does a workstation sink need?

It depends on the model. The five-foot Galley on the Roseville floor specifies a cabinet of at least 60 inches, and the Karran workstation models on the floor specify 33 to 36 inches. Always check the specification sheet.

Where can I see workstation sinks in Roseville?

At Design Gallery, in the Galley display, Karran Island and the Napa kitchen, which carry several workstation formats from the Galley and Karran.

On the floor

Where to see The Galley

Visit the Gallery

See it working on the Roseville floor.

Or call (916) 500-5417Monday –⁠ Saturday, 9:00 AM –⁠ 5:00 PM

Keep reading